%%% =====================================
%%% BibTeX-file{
%%% author = "J{\"o}rg Peters",
%%% }
%%% ====================================================================
%=======================================================================
@String{j-ADV-COMPUT-MATH = "Advances in computational mathematics"}
@String{j-ANN-NUM-MATH = "Annals of Numerical Mathematics"}
@String{j-APPROX-THEORY-APPL = "Approximation Theory and its
Applications"}
@String{j-CAD = "Computer Aided Design"}
@String{j-CAGD = "Computer-Aided Geometric Design"}
@String{j-CGF = "Com{\-}pu{\-}ter Graphics Forum"}
@String{j-CONST-APPROX = "Constructive Approximation"}
@String{j-CSGD = "Curves and Surfaces in Geometric Design"}
@String{j-NETWORKS = "Networks"}
@String{j-SIAM-J-NUM-ANAL = "SIAM Journal on Numerical Analysis"}
@String{j-TOG = "ACM Transactions on Graphics"}
@String{j-TOMS = "ACM Transactions on Mathematical Software"}
@String{j-AT = "Journal of Approximation Theory"}
@String{j-NM = "Numerische Mathematik"}
%=======================================================================
@String{pub-BH = "Birkh{\"{a}}user"}
@String{pub-BH:adr = "Basel, Switzerland"}
@String{pub-CIPS = "Canadian Information Processing Society"}
@String{pub-CIPS:adr = "243 College St, 5th Floor, Toronto, Ontario
M5T~2Y1, Canada"}
@String{pub-CLARENDON = "Clarendon Press"}
@String{pub-CLARENDON:adr = "New York, NY, USA"}
@String{pub-SIAM = "Society for Industrial and Applied Mathematics"}
@String{pub-SIAM:adr = "Philadelphia, PA, USA"}
@article{edge:, mytag="15edge",}
@article{pix:, mytag="1711pixar",}
@article{tsiac:, mytag="tsiac",}
@article{tril:, mytag="tril",}
@article{smiT:, mytag="smiT,refinable",}
@article{sg:, mytag="sg",}
@article{sing:, mytag="sing",}
@article{scaf:, mytag="cost",}
@article{sigT:, mytag="sigT"}
@article{sigT:,
title = "VR Simulation Leads to Enhanced Procedural Confidence for Surgical Trainees",
authors = "Heather Lesch and Evan Johnson and Juan Cendan and J\"org Peters",
mytag="sigT,JSURED_2019_334"}
%===============in reverse chronological order =========================
@article{bi34:, mytag="sm,bi34"}
@article{tight:,
mytag="tight,t2",}
@article{Sith:2019:COST,
title = "Corner-Sharing Tetrahedra for Modeling Micro-Structure",
author = "Meera Sitharam and Jeremy Youngquist and Maxwell Nolan
and J{\"o}rg Peters",
month = "May",
year = "2019",
pages = "1-15",
mytag="cost CAD_2019_157",}
%===================
@inproceedings{Sith:2019:COST,
title = "Corner-Sharing Tetrahedra for Modeling Micro-Structure",
author = "Meera Sitharam and Jeremy Youngquist and Maxwell Nolan
and J{\"o}rg Peters",
organization = "Solid Modelling Association",
booktitle = "Symposium on Solid and Physical Modeling 2019 ",
editor = "Xin (Shane) Li, Yong-Jin Liu, Pierre Alliez",
month = "Mar",
year = "2019",
pages = "1-14",
mytag="cost",}
@article{easal:,
title = "Algorithm 990: Efficient Atlasing and Search of Configuration Spaces of Point-Sets Constrained by Distance Intervals",
author = " Aysegul Ozkan, Rahul Prabhu, Troy Baker, James Pence, Jorg Peters, Meera Sitharam",
journal = "ACM Transactions on Mathematical Software (TOMS)",
volume = "44",
number = "4",
month = "Aug",
year = "2018",
mytag="easal",}
@article{yang:CGN:2018,
title = "Constraints for geodesic network interpolation at a vertex",
author = "Huogen Yang and J. Peters",
journal = "Computer Aided Geometric Design",
volume = "x",
month = "x",
year = "2019",
pages = "1-12",
mytag="huogen,COMAID1714",}
@article{KP:FFF:18,
title = " Fair free-form surfaces that are almost everywhere parametrically ${C}^2$ ",
author = "K{\c e}stutis Kar{\v c}iauskas and J{\"o}rg Peters",
journal = " Journal of Computational and Applied Mathematics ",
pages = "1--10",
year = "2018",
mytag="smart,CAM11826,Received2-APR-2018revised19-JUL-2018accepted25-JUL-2018Online publication complete: 23-AUG-2018DOI information: 10.1016/j.cam.2018.07.040 ",
}
@article{KP:RBQ:18,
title = "Refinable bi-quartics for design and analysis",
author = "K{\c e}stutis Kar{\v c}iauskas and J{\"o}rg Peters",
journal = "Computer-Aided Design",
pages = "1--10",
year = "2018",
mytag="g4,Computer-Aided Design,CAD-D-18-00031,10.1016/j.cad.2018.05.001",
}
@article{KP:rapid:18,
title = "Rapidly contracting subdivision yields finite, effectively ${C}^2$ surfaces",
author = "K{\c e}stutis Kar{\v c}iauskas and J{\"o}rg Peters",
journal = "Computers \& Graphics",
pages = "1--10",
year = "2018",
mytag="rapid,15/45 CAG-D-18-00105,https://doi.org/10.1016/j.cag.2018.05.018"}
@article{akl:,
title = "On ${G}^1$ stitched bi-cubic {B}\'ezier patches with
arbitrary topology",
author = "J{\"o}rg Peters",
journal = "Computers \& Graphics",
pages = "1--3",
year = "2017",
mytag="akl,darap,10.1016/j.cag.2017.11.012,http://authors.elsevier.com/sd/article/S0097849317301966,http://arxiv.org/abs/1709.02994,http://authors.elsevier.com/sd/article/S0097849317301966",}
@article{Karciauskas:gsub:2017,
title = "A new class of guided ${C}^2$ subdivision surfaces combining
good shape with nested refinement",
author = "K{\c e}stutis Kar{\v c}iauskas and J{\"o}rg Peters",
journal = "Computer Graphics Forum",
Volume = "37",
issue = "6",
pages = "84-95",
year = "2018",
mytag="gsub,CGF-17-SGP-067,OWNfinal,darap,http://dx.doi.org/10.1111/cgf.13313",}
@article{acs:,
title = "Towards Surgeon-Authored VR Training: the Authoring Interface",
author = "Martin Sarov and Ruiliang Gao and Jeremy Youngquist and
George Sarosi and Sergei Kurenov and J{\"o}rg Peters",
journal = "2018 Annual ACS Surgical Simulation Summit, Chicago",
month = "March 16-17",
year = "2018",
mytag="acs",}
%=========================================
@article{Kurenov:SAV:2016,
author = "Sergei Kurenov and Juan Cendan and Saleh Dindar and Kristopher Atwood
and James Hassett and Ruth Nawotniak and Gregory Cherr and William G. Cance
and J{\"o}rg Peters",
title = "Surgeon-authored virtual laparoscopic adrenalectomy module is
judged effective and preferred over traditional teaching tools",
journal = "Surgical Innovation",
publisher = "SAGE",
volume = "24",
number = "1",
pages = "72-81",
year = "2017",
mytag="tips US, Nov",}
@article{Sarov:2018:AIS,
title = "An Authoring Interface for Surgeon-Authored VR Training",
author = "M. Sarov and R. Gao and J. Youngquist and G. Sarosi and S. Kurenov and J. Peters",
journal = "International Journal of Computer Assisted Radiology and Surgery",
month = "June",
volume = "13",
pages = "1-(1-4)-273",
year = "2018",
mytag="June 20 - 23, 2018,Joint Congress of IFCARS / ISCAS / CAR / CMI / CAD / IPCAI,www.cars-int.org, Paper Code: LE-56"
}
@article{Karciauskas:TJS:2017,
title = "T-junctions in spline surfaces",
author = "K{\c e}stutis Kar{\v c}iauskas and Daniele Panozzo and J{\"o}rg Peters",
journal = "ACM Tr on Graphics, ACM Siggraph",
pages = "170:1--9",
number = "5",
volume = "36",
year = "2017",
mytag="tj",}
@article{Nguyen:ELB:2017,
title = "Explicit Least-degree Boundary Filters for
{D}iscontinuous {G}alerkin",
author = "Dang-Manh Nguyen and J{\"o}rg Peters",
journal = "SIAM J. on Scientific Computing (SISC)",
volume = "39",
number = "4",
pages = "A1741–A1765 (25 pages)",
year = "2017",
mytag="lsiac,http://epubs.siam.org/doi/abs/10.1137/17M1114016, http://epubs.siam.org/toc/sjoce3/39/4",}
@article{Karciauskas:ISR:2016,
title = "Improved shape for refinable surfaces with singularly parameterized irregularities",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Computer Aided Design",
volume = "90",
month = "Sept",
year = "2017",
pages = "191-198",
mytag="singkk,JCAD2517 ",}
@Inproceedings{Karciauskas:ISRproc:2016,
title = "Improved shape for refinable surfaces with singularly parameterized irregularities",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
organization = "Solid and Physical Modeling",
booktitle = "Proc of SPM 2017",
editor = "M. Botsch, S. Hahmann, J. Zhang",
month = "June",
year = "2017",
pages = "1-8",
mytag="singkk,JCAD2517 ",}
@article{Karciauskas:RGF:2016,
title = "Refinable ${G}^1$ functions on ${G}^1$ free-form surfaces",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Computer Aided Geometric Design",
volume = "54",
month = "May",
year = "2017",
pages = "61-73",
mytag="gref, 10.1016/j.cagd.2017.02.014, COMAID1608",}
%=========================================
@article{DBLP:journals/corr/KarciauskasPP16,
author = {Kestutis Karciauskas and
Daniele Panozzo and
J{\"{o}}rg Peters},
title = {Spline surfaces with T-junctions},
journal = {CoRR},
volume = {abs/1610.05351},
year = {2016},
url = {http://arxiv.org/abs/1610.05351},
timestamp = {Wed, 07 Jun 2017 14:40:43 +0200},
biburl = {http://dblp.dagstuhl.de/rec/bib/journals/corr/KarciauskasPP16},
bibsource = {dblp computer science bibliography, http://dblp.org}
}
@misc{Peters:BIRS:2017,
author = "J. Peters and D. Pai and U. Reif",
title = "Report on workshop Geometry \& Computation for Interactive Simulation",
url = "https://www.birs.ca/events/2017/5-day-workshops/17w5008",
year = "2017",
month = "Sept",
pages = "1:15",
mytag = "",
}
@misc{Dindar:TIPS:2016,
title = "Virtual Training for {N}issen Fundoplication",
author = "Saleh Dindar and G. Sarosi and Jorg Peters",
booktitle = "IMSH International Meeting on Simulation in Healthcare, San Diego",
editor = "Society for Simulation in Healthcare",
month = "January 16-20",
year = "2016",
mytag = "nih",
}
%========covered by NSFfinal=========================================
@article{Sarov:RPG:2016,
title = "Refinable Polycube {G}-Splines",
author = " Martin Sarov and J{{\"o}}rg Peters",
journal = "Computers \& Graphics (SMI 2016)",
volume = "58",
month = "August",
year = "2016",
pages = "92--101",
mytag="polycube,CAG 2718,doi10.1016/j.cag.2016.05.021",}
@article{Karciauskas:CCB:2016,
title = "Curvature continuous bi-4 constructions for scaffold- and
sphere-like surfaces",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Computer Aided Design (SPM 2016)",
volume = "78",
month = "June 17",
year = "2016",
pages = "48-59",
mytag="netwk JCAD2420,10.1016/j.cad.2016.05.005",}
%========covered by NSF16=========================================
@article{Nguyen:2016:NUD,
title = "Nonuniform Discontinuous Galerkin Filters via Shift and Scale",
author = "Dang-Manh Nguyen and J{{\"o}}rg Peters",
journal = "SIAM J. Numer. Anal.",
volume = "54",
number = "3",
year = "2016",
pages = "1401-1422",
mytag="psiac,1341-1483,doi:10.1137/15M1053220",}
@InProceedings{Dindar:2016:MMVR,
author = "Saleh Dindar and Thien Nguyen and J{{\"o}}rg Peters",
title = "Towards surgeon-authored VR training: the scene-development cycle",
publisher = "IOS Press, Amsterdam",
organization = "Studies in Health Technology and Informatics (SHTI)",
booktitle = "Proceedings of {M}edicine {M}eets {V}irtual {R}eality
(MMVR) April 9-12 2016, L.A. ,CA",
pages = "1-6",
year = "2016",
mytag="tips, 10.1007/s10484-005-6386-y"
}
@article{Nguyen:2016:RSE,
title = "Refinable ${C}^1$ spline elements for irregular quad layout",
author = "Thien Nguyen and J{{\"o}}rg Peters",
journal = "Computer Aided Geometric Design",
volume = "43",
month = "March 29",
year = "2016",
pages = "123-130",
mytag="15sing:comaid1541, doi 10.1016/j.cagd.2016.02.009,
http://authors.elsevier.com/sd/article/S0167839616300103",}
%----------------------------------------
@article{Peters:2015:GSF,
title = "General Spline Filters for {D}iscontinuous {G}alerkin Solutions",
author = " J{{\"o}}rg Peters",
journal = "Computers \& Mathematics with Applications",
volume = "70",
number = "5",
month = "September",
year = "2015",
pages = "1046-1050",
mytag="14siac,dx.doi.org/10.1016/j.camwa.2015.06.034",}
@article{Nguyen:2016:CFE,
title = "${C}^1$ finite elements on non-tensor-product 2d and 3d manifolds",
author = "Thien Nguyen and K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Applied Mathematics and Computation",
volume = "272",
number = "1",
year = "2016",
pages = "148-158",
mytag="14giga,iga:,2014iga,AMC_AMC-D-15-00474,10.1016/j.amc.2015.06.103, online 10nov2015",}
@article{bi6:2016:MBG,
title = "Minimal bi-6 ${G}^2$ completion of bicubic spline surfaces",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Computer Aided Geometric Design",
volume = "41",
month = "Jan",
year = "2016",
pages = "10-22",
mytag="bi6, epub Nov28 2015 COMAID 1515,10.1016/j.cagd.2015.10.005",}
@phdthesis{Dindar:2016:,
title = "INTERACTIVE SOFT-TISSUE AUTHORING FOR TEACHING SURGICAL PROCEDURES",
author = "Saleh Dindar",
institution = "University of Florida",
school = "Dept. CISE",
month = "May",
year = "2016",
mytag="16sd-phd"
}
@misc{obstaclecourse,
title = "Quad-net obstacle course",
author = { K{\c e}stutis Kar{\v c}iauskas and J{\"o}rg Peters},
howpublished = "\url{http://www.cise.ufl.edu/research/SurfLab/shape\_gallery.shtml}",
note = "Accessed: 2017-09-05",
}
@misc{ipass,
title = "iPass algorithm",
author = {Ruijin Wu and Young-In Yeo and Lihan Bin and J{{\"o}}rg Peters},
howpublished = "\url{https://bitbucket.org/surflab/ipass\_gl4}",
note = "Accessed: 2015-10-10",
}
%=============FAR15 below==================================
@article{Kestutis:2015:ISM,
title = "Improved shape for multi-surface blends",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Graphical Models",
volume = "8",
month = "2",
year = "2015",
pages = "87-98",
mytag="14dag, YGMOD 925,10.1016/j.gmod.2015.06.006",}
@article{Karciauskas:2015:CBS,
title = "Can bi-cubic surfaces be class {A}?",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Computer Graphics Forum",
volume ="34",
Number = "5",
pages =" 229--238",
month = "August",
year = "2015",
mytag="bi3 Computer Graphics Forum",}
@inproceedings{Karciauskas:2015:CBSconf,
title = "Can bi-cubic surfaces be class {A}?",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
booktitle = "SGP 2015, Symposium Geometry Processing 2015,
Graz",
month = "July 6-8",
year = "2015",
mytag="bi3 Computer Graphics Forum",}
@article{Peters:2015:PSS,
title = "Polynomial Spline Surfaces with Rational Linear Transitions",
author = "J{{\"o}}rg Peters and Martin Sarov",
journal = "Computers \& Graphics",
volume = "51",
month = "Oct",
year = "2015",
pages = "43--51",
mytag="14_36, pants, http://dx.doi.org/10.1016/j.cag.2015.05.013",}
@inproceedings{Peters:2015:PSSconf,
title = "Polynomial Spline Surfaces with Rational Linear Transitions",
author = "J{{\"o}}rg Peters and Martin Sarov",
booktitle = "Shape Modeling International (SMI), Lille",
month = "June",
year = "2015",
}
@inproceedings{Karciauskas:2015:GBSconf,
title = "Generalizing bicubic splines for modelling and
{IGA} with irregular layout",
author = "K{\c e}stutis Kar{\v c}iauskas and Thien Nguyen and J{{\"o}}rg Peters",
booktitle = "GDSPM 2015 in Salt Lake City, Utah October 12-14",
note = "best paper award 3",
year = "2015",
myref = "CAD-D-15-00171,bi4",
}
@article{Karciauskas:2015:GBS,
title = "Generalizing bicubic splines for modelling and {IGA}
with irregular layout",
author = "K{\c e}stutis Kar{\v c}iauskas and Thien Nguyen and J{{\"o}}rg Peters",
journal = "Computer Aided Design",
volume = "70",
pages = "23-35",
month = "Jan",
year = "2016",
mytag="2015iga, 10.1016/j.cad.2015.07.014, JCAD2368",}
@article{Groisser:2014:MGK,
title = "Matched ${G}^k$-constructions always yield ${C}^k$-continuous
isogeometric elements",
author = {David Groisser and J{\"o}rg Peters},
journal = "Computer Aided Geometric Design",
volume = "34",
month = "March",
year = "2015",
pages = "67-72",
mytag="14g1c1, NIHMS 668223, COMAID1464,http://dx.doi.org/10.1016/j.cagd.2015.02.002",
}
@article{KKJP:2014:BGS,
title = "Biquintic ${G}^2$ surfaces via functionals",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Computer Aided Geometric Design",
year = "2015",
pages = "17-29",
mytag="14bi5, bi5, COMAID_1457",
doi = "10.1016/j.cagd.2014.11.003",
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@article{KKJP:2014:PAB,
title = "Point-augmented biquadratic ${C}^1$ subdivision surfaces",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Graphical Models",
volume = "77",
month = "Jan",
year = "2015",
pages = "18-26",
mytag="14bi2sub, bi2, YGMOD_909, doi:10.1016/j.gmod.2014.10.003",
}
@article{KKJP:2014:SMS,
title = "Smooth multi-sided blending of biquadratic splines",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
journal = "Computers \& Graphics",
volume = "46",
year = "2015",
pages = "172-185",
mytag="bifin, 14bi234 14sgpbifin, CAG_2494",
doi = "10.1016/j.cag.2014.09.004",
}
@inproceedings{KKJP:2014:cSMS,
title = "Smooth multi-sided blending of biquadratic splines",
author = " K{\c e}stutis Kar{\v c}iauskas and J{{\"o}}rg Peters",
booktitle = "Shape Modeling International (SMI), Hongkong",
month = "Oct",
year = "2014",
pages = "172-185",
mytag="bifin, 14sgpbifin, CAG_2494",
doi = "10.1016/j.cag.2014.09.004",
}
@unpublished{Peters:talks:2014,
title = "Isogeometric analysis at irregular points",
author = {J.~Peters},
year = {2014},
note= {Itl.\ workshop on Geometric Design, Schloss Dagstuhl, Germany, May 2014,
Conference on Curves and Surfaces, Paris, France, June 2014, Icosahom 2014, June 2014, Salt Lake City},
mytag = "http://www.dagstuhl.de/dagrep,http://dx.doi.org/10.4230/DagRep.4.5.68",
}
@phdthesis{Wu:2014:CSA,
title = "Confining and Sampling applied to computer graphics and molecular science",
author = "Ruijin Wu",
institution = "University of Florida",
school = "CISE",
year = "2014",
mytag="14wu"
}
@inproceedings{Wu:2014:cCRR,
title = "Correct resolution rendering of trimmed spline surfaces",
author = "Ruijin Wu and J{{\"o}}rg Peters",
booktitle = "Solid and Physical Modeling (SPM) 2014 Hongkong",
note = "1st prize, best paper",
month = "Oct",
year = "2014",
mytag="trim, 14trim_rw,10.1016/j.cad.2014.08.012"
}
@article{Wu:2014:CRR,
title = "Correct resolution rendering of trimmed spline surfaces",
author = "Ruijin Wu and J{{\"o}}rg Peters",
journal = "Computer-Aided Design",
volume = "58",
year = "2015",
pages = "123--131",
mytag="12trim,10.1016/j.cad.2014.08.012"
}
@article{Nguyen:2014:CSS,
title = {A comparative study of several classical, discrete differential
and isogeometric methods for solving {P}oisson's equation on the disk},
author = {Thien Nguyen and K{\c e}stutis Kar{\v c}iauskas and J{\"o}rg Peters},
journal = "Axioms",
volume = 3,
number = 2,
month = "Jan",
pages = "280--299",
year = "2014",
mytag="14iga,doi:10.3390/axioms3020280",
}
%==========================================================
@article{Peters:2014:RST,
title = "Refinability of splines derived from regular tessellations",
author = "J. Peters",
journal = "Computer Aided Geometric Design",
volume = "31",
month = "may",
year = "2014",
pages = "141-147",
note = "accepted Feb 2014, doi 10.1016/j.cagd.2014.02.001",
mytag="1211hex, COMAID 1407",
}
@article{Peters:2013:SUK,
title = "Splines and unsorted knot sequences",
author = "J. Peters",
journal = "Computer Aided Geometric Design",
volume = "30",
number = "7",
year = "2013",
pages = "733-741",
mytag="x06knots_db COMAID1389",
doi = "10.1016/j.cagd.2013.06.001",
}
@article{SAGES:, mytag=" abstract 2013 SAGES TIPS test and validation",}
@inproceedings{bi5mathsurf:,
title = "Biquintic ${G}^2$ surfaces",
author = "K. Kar{\v c}iauskas and J. Peters",
booktitle = "The Mathematics of Surfaces XIV, Birmingham, England",
editor = "Robert~J.~Cripps, G.~Mullineux and M.~A.~Sabin",
publisher = "The Institute of Mathematics and its Applications",
isbn = "978-0-905091-30-3",
month = "September",
year = "2013",
pages = "213--236",
mytag="12bi5"
}
@inproceedings{Yeo:2012:EPA:,
title = "Efficient Pixel-accurate Rendering of Animated Curved Surfaces",
author = "Young In Yeo and Sagar Bhandare and J. Peters",
booktitle = "8th International Conference on Mathematical Methods for
Curves and Surfaces, Oslo June 2012",
year = "2014",
publisher = "Springer, LNCS 8177",
editor = "Larry Schumaker and Knut Morken and Marie-Laurence Mazure and Tom Lyche and Georg Muntingh and Michael Floater",
pages = "491--509",
mytag="12ani"
}
@inproceedings{Karciauskas:NIS:2014,
title = "Non-uniform interpolatory subdivision based on
local interpolants of minimal degree",
author = "K. Kar{\v c}iauskas and J. Peters",
booktitle = "8th International Conference on Mathematical Methods for
Curves and Surfaces, Oslo June 2012",
year = "2014",
publisher = "Springer, LNCS 8177",
editor = "Larry Schumaker and Knut Morken and Marie-Laurence Mazure and Tom Lyche and Georg Muntingh and Michael Floater",
pages = "248--264",
mytag= "12oslo_kk",
}
%==========================================================
@misc{Dindar:2013:SwarmCode,
title = "Swarm-NG: A CUDA library for Parallel n-body Integrations with focus on simulations of planetary system ",
author = { Saleh Dindar and Eric B. Ford and Mario Juric and Young In Yeo and Jianwei Gao and Aaron C. Boley and Benjamin Nelson and J{\"o}rg Peters},
howpublished = "\url{https://github.com/AstroGPU/swarm}",
note = "Accessed: 2016-12-01",
}
@article{Dindar:2013:Swarm,
title = "Swarm-NG: a CUDA Library for Parallel n-body Integrations with focus
on Simulations of Planetary Systems",
author = "Saleh Dindar and Eric B Ford and Mario Juric and Young In Yeo
and Jianwei Gao and Aaron C Boley and Benjamin Nelson and Jörg Peters",
journal = "New Astronomy",
year = "2013",
pages = "6--18",
mytag = "12swarm_sdyy, NEASPA_658, NEWAST-D-12-00117R1"
}
@article{Karciauskas:CSS:2012,
title = "Curvature-sensitive splines and design with basic curves",
author = "K. Kar{\v c}iauskas and J. Peters",
journal = "Computer-Aided Design",
year = "2013",
volume = "45",
pages = "415-423",
mytag="12spm_kk",
accept = "JCAD 1997 87 submission, 25 full-length and 12 short-length papers",
doi = "http://dx.doi.org/10.1016/j.cad.2012.10.024",
}
@article{Grandine:FFS:2012,
title = "Special Issue of selected papers from the 8th Dagstuhl seminar on Geometric Modeling",
author = "T. Grandine and S. Hahmann and J. Peters and W.~Wang",
journal = "Graphical Models",
year = "2012",
pages = "x+1--x+2",
mytag ="11dag,YGMOD_818",
}
@article{Karciauskas:2012:FFS,
title = "Free-Form Splines Combining {NURBS} and Basic Shapes",
author = "K. Kar{\v c}iauskas and J. Peters",
journal = "Graphical Models",
year = "2012",
pages = "351-360",
mytag ="11dag,YGMOD_815",
}
@article{Peters:CoV:2012,
title = " Changing Variables ",
author = "J. Peters",
journal = "IEEE Computers and Graphical Applications",
year = "2012",
pages = "88--93",
mytag ="12taubin",
doi = "10.1109/MCG.2012.51",
}
@article{Karciauskas:NUI:2013,
title = "Non-uniform interpolatory subdivision via splines",
author = "K. Kar{\v c}iauskas and J. Peters",
journal = "Journal of Computational and Applied Mathematics,
MATA 2012 issue",
year = "2013",
volume = "240",
pages = "31--41",
mytag= "12unimata, http://dx.doi.org/10.1016/j.cam.2012.07.004",
}
@article{Hermann:2012:GCC,
author = "Tamas Hermann and Jorg Peters and Tim Strotman",
title =
"Curve Networks compatible with {$G^2$} surfacing",
journal = "Computer Aided Geometric Design",
volume ="29",
year = "2012",
month = "April",
pages = "219-230",
dox = "http://dx.doi.org/10.1016/j.cagd.2011.10.003",
mytag = "09g2tamtim",
}
%===============================================================
@inproceedings{Myles:2011:CwPS,
title = "${C}^2$ Polar Splines",
author = "Ashish Myles and J{\"o}rg Peters",
booktitle = "SIAM GD/SPM conference",
editor = "C.~Bajaj and M-S.~Kim and S.~Hahmann",
year = "2011",
pages = "x+1--x+12"
}
%===============================================================
@inproceedings{yeo:EPA:2011,
author = "Young In Yeo and Lihan Bin and J{\"o}rg Peters",
title = {Efficient Pixel-Accurate Rendering of Curved Surfaces},
booktitle = "Interactive 3D graphics, 2012",
pages = "1--8",
year = "2012",
mytag = "1109reyes_lb,11iPASS, nsf 1117695",
}
@misc{bezierview,
author = "SurfLab",
title = "Bezierview",
url = "http://www.cise.ufl.edu/research/SurfLab/bview/"
}
@inProceedings{Karciauskas:2011:MRB,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Modeling with rational biquadratic splines",
booktitle = "SIAM GD/SPM conference",
editor = "C.~Bajaj and M-S.~Kim and S.~Hahmann",
pages = "x+1--x+10",
year = "2011",
mytag = "11siam, noack",
}
@article{Karciauskas:2011:MwRB,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Modeling with rational biquadratic splines",
journal = "Computer-{A}ided {D}esign",
pages = "1350--1359",
year = "2011",
doi = "JCAD_CAD-D-11-00170",
url = "http://dx.doi.org/10.1016/j.cad.2011.08.024",
mytag = "11siam, noack",
}
@article{Myles:2011:CPS,
title = "${C}^2$ Splines Covering Polar Configurations",
author = "Ashish Myles and J{\"o}rg Peters",
journal = "Computer Aided Design",
number = "11",
volume = "43",
month = "november (Proc SPM)",
pages = "1322-1329",
year = "2011",
mytag = "09bi6c2polar_am/theory, 0728797",
}
% inProceedings{subcurve:kk,
@inProceedings{Karciauskas:2011:CAC,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Curvature of approximating curve subdivision schemes",
booktitle = "Curves and Surfaces, LNCS 6920, Avignon June 24-30 2010",
editor = "J.D.~Boissonat and M.L.~Mazure and L.L.~Schumaker",
pages = "369-381",
publisher = "Springer-verlag, Berlin Heidelberg",
year = "2011",
url = "http://www.springer.com/computer/image+processing/book/978-3-642-27412-1"
}
@article{Karciauskas:2011:RGS,
author = "K. Kar{\v c}iauskas and J. Peters",
journal = "Graphical Models",
title =" Rational ${G}^2$ Splines",
year = "2011",
volume = "23",
number = "5",
pages = "286--295",
ann = "YGMOD778, GMOD-10-65",
pii = "S1524-0703(11)00021-X",
doi = " 10.1016/j.gmod.2011.05.004 ",
url = "http://dx.doi.org/10.1016/j.gmod.2011.05.004",
mytag = "10spl_kk, ack:nsf high",
}
@article{Karciauskas:2011:RCG2,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Rational bi-cubic ${G}^2$ splines for design with basic shapes",
year = "2011",
journal = "Computer Graphics Forum (SGP2011)",
volume = "30",
number = "5",
pages = "1389--1395",
mytag = "11g2_kk, ack CCF-0728797",
}
@InProceedings{Karciauskas:2011:RCG2p,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Rational bi-cubic ${G}^2$ splines for design with basic shapes",
year = "2011",
booktitle = "Symposium on Geometry Processing",
pages = "x--x+6",
mytag = "11g2_kk, ack CCF-0728797",
}
@inproceedings{lihanvineet:reyes:czech,
author = "Lihan Bin and Vineet Goel and J{{\"o}}rg Peters",
title = "DirectX 11 Reyes Rendering",
booktitle = "Proc GraVisMa, Computer Graphics, Computer Vision and Mathematics,
2010",
editor = "V.~Skala and E.M.~Hitzer",
pages = "1-6",
year = "2010",
}
@Article{journals/jcam/KimP11,
title = "Symmetric box-splines on root lattices",
author = "Minho Kim and J{{\"o}}rg Peters",
journal = "J. Computational Applied Mathematics",
year = "2011",
number = "14",
volume = "235",
bibdate = "2017-05-26",
bibsource = "DBLP,
http://dblp.uni-trier.de/https://doi.org/10.1016/j.cam.2010.11.027;
DBLP,
http://dblp.uni-trier.de/db/journals/jcam/jcam235.html#KimP11",
pages = "3972--3989",
}
@article{Kim:2011:SBS,
title = "Symmetric Box-Splines on Root Lattices",
author = "M. Kim and J. Peters",
journal = "Journal of Computational and Applied Mathematics",
volume= "235",
number = "14",
month ="May",
pages= "3972-3989",
year = "2011",
mytag = "11root_mk, CCF-0728797",
}
%===============================================================
% http://www.minho-kim.com/pubs.bib
%Current Status of Author-Directed Surgical Simulation:
% The Toolkit for Illustrations in Surgery.
% authors = "Cendan JC, Peters J, Kurenov S",
% Oral presentation to Interservice/Industry
% Training, Simulation and Education Conference (I/ITSEC) 2010,
% Post I/ITSEC Workshop on Surgical Simulation,
% December 3, 2010, Orlando, FL.
%===============================================================
@article{Sitharam:2010:RCC,
author = "M.~Sitharam and Y.~Zhou and J.~Peters",
title = "Reconciling conflicting combinatorial preprocessors
for geometric constraint systems",
journal = "IJCGA",
volume = "20",
number = "6",
month = "Dec",
year = "2010",
pages = "631--651",
}
%-------------------------------------------------------
@article{Fan:2010:SBS,
author = {Jianhua Fan and J{{\"o}}rg Peters},
title = {Smooth Bi-3 Spline Surfaces with fewest knots},
journal = {Computer Aided Design},
year = {2011},
volume = "43",
number = "2",
month = "Feb",
pages = {180--187},
note = "JCAD 1686",
url = "http://dx.doi.org/10.1016/j.cad.2010.11.002",
}
@InProceedings{Yeo:2010:MMVR,
author = "Young-In Yeo and Saleh Dindar and George Sarosi and
J{{\"o}}rg Peters",
title = "Enabling Surgeons to Create Simulation-Based Teaching Modules",
publisher = "IOS Press, Amsterdam",
organization = "Studies in Health Technology and Informatics (SHTI)",
booktitle = "Proceedings of {M}edicine {M}eets {V}irtual {R}eality
(MMVR) Feb 8-12 2011, Long Beach,CA",
volume = "163",
pages = "723-729",
year = "2011"
}
@article{kim:2010:andual,
author = "Minho Kim and J{{\"o}}rg Peters",
title = "Symmetric Box-Splines on the $\mathcal{A}_n^*$ Lattice",
journal = "Journal of Approximation Theory",
volume = 162,
number = 9,
pages = "1607--1630",
month = sep,
year = 2010,
doi = "10.1016/j.jat.2010.04.007",
mytag = "08andual",
}
@inproceedings{Peters:2010:PLT,
author = "J{{\"o}}rg Peters and Jianhua Fan",
title = {The projective linear transition map
for constructing smooth surfaces},
booktitle = {Shape Modelling International, SMI’10 conference},
year = {June 21-23 2010},
location = {Aix-en-Provence, France},
publisher = {IEEE Computer Society},
editor = "jean-philippe.pernot",
pages = "124--130",
accept = "32.1 (18/56)",
}
@article{Hermann:2010:GCC,
author = "Tamas Hermann and Jorg Peters and Tim Strotman",
title =
"A Geometric Constraint on Curve Networks Suitable for Smooth Interpolation",
journal = "Computer Aided Design",
volume ="43",
year = "2011",
month = "May",
pages = "741-746"
}
% note = "JCAD 1637 CAD-D-10-00022, in press, Jan22 Special Issue: 2009 SIAM/ACM GPM",
@techreport{Hermann:2010:CCNtech,
author = "Tamas Hermann and Jorg Peters and Tim Strotman",
title = "Constraints on Curve Networks suitable for ${G}^2$ Interpolation",
number = "REP-2010-490",
institution = "Dept of CISE, University of Florida",
month = "Feb",
year = "2010",
}
%===========================================================================
@article{Dag:2008:,
author = "Stefanie Hahmann and Gerald Farin and Jorg Peters
and Wenping Wang",
title = "Editorial: Special issue on geometric modeling",
year = "2009",
journal = "Computing",
pages = "71--72(268)",
volume = 86,
Number = "2-3",
doi = "10.1007/s00607-009-0069-0",
}
@article{Peters:2009:ESS,
author = "Jorg Peters and Tianyun Ni and Ignacio Castano and Jason Mitchell
and Philip Schneider and Vivek Verma",
title = "Efficient substitutes for subdivision surfaces",
journal = "Siggraph 2009 Tutorial Course",
pages = "1--104",
year = "2009",
note = "T. Ni, I Castano from NVidia, J Mitchell from Valve, P. Schneider,V Varma, ILM",
}
%===============================================================
@inproceedings{Hermann:2010:CCN,
author = "T.~Hermann and J.~Peters and T. Strotman",
title = {Constraints on Curve Networks suitable for ${G}^2$ Interpolation },
booktitle = {GMP 2010 Geometric Modeling and Processing},
year = {2010},
pages = {1--10},
publisher = {Springer-Verlag},
address = {New York, NY, USA},
editor = "Bernard Mourrain and S. Schaefer and Guoliang Xu",
location = {Castro Urdiales, Spain},
}
@Article{Sitharam:2010:OPS,
author = "M. Sitharam and J. Peters and Yong Zhou",
title = "Optimized parametrization of systems of incidences between rigid bodies",
journal = "Journal of Symbolic Computation",
volume = "45",
number = "4",
month = "Feb",
year = "2010",
pages= "481--498",
doi = "10.1016/j.jsc.2010.01.011",
abb = "YJSCO1143",
lnk = "http://www.sciencedirect.com/science/article/pii/S0747717110000192",
}
@article{Sitharam:2005:SMW,
author = {Meera Sitharam and J{{\"o}}rg Peters and Yong Zhou},
title = "Solving minimal, wellconstrained, 3{\sf D} geometric
constraint systems: combinatorial optimization of algebraic complexity",
journal = "IJSC",
volume = "xx",
number = "x",
month = "xx",
year = "200x",
pages= "1--20",
}
@article{Peters:2009:CSS,
author = "J. Peters and Jianhua Fan",
title = "On the Complexity of Smooth Spline Surfaces from Quad Meshes",
journal = j-CAGD,
volume = "27",
pages = "96--105",
year = "2009",
doi = "doi:10.1016/j.cagd.2009.09.003",
}
@article{Wu:2009:ESM,
author = "Jian Wu and Minho Kim and Jorg Peters and Heechy and Sanjiv Samant",
title = "Evaluation of similarity measures for use in the intensity-based rigid 2D-3D registration for patient positioning in radiotherapy",
journal = "Medical Physics",
volume = "36",
number = "12",
pages = "5391-5403",
month = dec,
year = "2009",
doi = "http://dx.doi.org/10.1118/1.3250843",
}
%%%% = "Medical Physics: MS #09-441R1Decision Letter",
@inproceedings{Hermann:2009:GCS,
author = "T.~Hermann and J.~Peters and T. Strotman",
title = {A geometric criterion for smooth interpolation of curve networks},
booktitle = {SPM '09: 2009 SIAM/ACM Joint Conference on Geometric and Physical Modeling},
year = {2009},
isbn = {978-1-60558-711-0},
pages = {169--173},
location = {San Francisco, California},
doi = {http://doi.acm.org/10.1145/1629255.1629277},
note = "24 of 85",
publisher = {ACM},
address = {New York, NY, USA},
editor = "J. Keyser",
}
@misc{Yeo:2009:sages,
title = "Advances in educator-originated surgical simulations using TIPS",
author = "Yeo YI and Kurenov S and Peters J and Cendan JC",
note = "Poster session at the SAGES 2009
Conference, Phoenix, AZ, April 23, 2009."
}
@misc{Punak:2009:sages,
title = "Development of a virtual simulator for hiatal hernia
repair using the Covidien/Autosuture Endostich device",
author = "S. Punak and S Kurenov and J Peters and JC Cendan",
note = "Poster session at the SAGES 2009
Conference, Phoenix, AZ, April 23, 2009."
}
@article{Myles:2009:CPS,
title = "Bi-3 ${C}^2$ Polar Subdivision",
author = "Ashish Myles and J{\"o}rg Peters",
journal = "ACM Transactions on Graphics",
number = "3",
volume = "28",
year = "2009",
note = "Siggraph 2009",
abstract = "Generalizes subdivision of bi-3 splines to polar
configurations, providing a partial answer to a 30 year old challenge
at the core of subdivision theory and practice."
}
@phdthesis{Myles:CCB:2008,
author = {Ashish Myles},
title = {Curvature-Continuous Bicubic Subdivision Surfaces for
Polar Configurations},
school = {University of Florida},
year = {2008},
month = dec
}
@article{Karciauskas:2008:ASS,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Adjustable Speed Surface Subdivision",
journal = "Computer Aided Geometric Design.",
pages = "962-969",
volume = "26",
year = "2009",
}
@InProceedings{Karciauskas:2009:FCC,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Finite Curvature Continuous Polar Patchworks",
booktitle = "IMA Mathematics of Surfaces XIII Conference",
year = "2009",
pages= "222-234",
editor = "E.~Hancock and R.R.~Martin and M.~Sabin",
doi = "10.1007/978-3-642-03596-8_12"
}
@InProceedings{Peters:2009:IGP,
author = {J{{\"o}}rg Peters and K. Kar{\v c}iauskas},
title = {An introduction to guided and polar surfacing},
booktitle = {Mathematical Methods for Curves and Surfaces},
note = "Seventh International Conference on Mathematical Methods for
Curves and Surfaces Toensberg, Norway, Toensberg, Norway,
June 26-July 1, 2008, Revised Selected Papers",
volume = "5862/2010",
year = {2010},
pages= "299--315",
publisher = "Springer",
url = "www.springerlink.com/content/978-3-642-11619-3",
}
@article{Myles:2009:IPH,
author = "Myles, Ashish and Yeo and Kim and Cendan and Kurenov and Peters",
title = "Interactive Peritoneum in a Haptic Surgery Illustration
Environment",
journal = "Studies in Health Technology and Informatics",
volume = "142",
year = "2009",
note="proceedings of Medicine Meets Virtual Reality 17: NextMed by Design",
isbn = "ISBN 978-1-58603-964-6",
pages="221-223"
}
@article{Kurenov:2009:DIV,
author = "Kurenov, S. and Punak, S. and Peters, J. and Lee, C. and Cendan, J",
title = "Development and Initial Validation of a Virtual Reality
Haptically Augmented Surgical Knot-Tying Trainer for the Autosuture
ENDO STITCH Instrument",
journal = "Studies in Health Technology and Informatics",
volume = "142",
year = "2009",
note="proceedings of Medicine Meets Virtual Reality 17: NextMed by Design",
isbn = "ISBN 978-1-58603-964-6",
pages="142-144"
}
@article{Karciauskas:2009:ACC,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Assembling curvature continuous surfaces from triangular patches",
journal = "Computers and Graphics",
pages = "204-210",
year = "2009",
volume = "33",
number = "3",
doi = "http://dx.doi.org/10.1016/j.cag.2009.03.015",
mytag = "08tri8c2_kk",
}
% volume = "xx", number = "xx", pages = "xx--xx", month = "June",
@article{Karciauskas:2009:LSS,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Lens-shaped surfaces and ${C}^2$ subdivision",
journal = "Computing",
year = "2009",
volume = "86",
number = "2",
pages = "171--183",
}
@article{Kim:2008:FSE,
author = "M.~Kim and J.~Peters",
title = "Fast and stable evaluation of box-splines via the
{B}ernstein-{B}\'ezier form",
journal = "Numerical Algorithms",
volume = "50",
number = "4",
pages = "381-399",
year = "2009",
month = "April",
}
%===============================================================
@InProceedings{Fan:2008:SBS,
author = {Jianhua Fan and J{{\"o}}rg Peters},
title = {On Smooth Bicubic Surfaces from Quad Meshes},
booktitle = {ISVC (1)},
year = {2008},
pages = {87-96},
ee = {http://dx.doi.org/10.1007/978-3-540-89639-5_9},
crossref = {DBLP:conf/isvc/2008-1},
bibsource = {DBLP, http://dblp.uni-trier.de}
}
@phdthesis{Kim:SBL:2008,
author = {Minho Kim},
title = {Symmetric box-splines on root lattices},
school = {University of Florida},
year = {2008},
month = aug ,
}
@phdthesis{Ni:RTS:2008,
author = {Tianyun Ni},
title = {Real-time smooth surface construction on the graphics
processing unit},
school = {University of Florida},
year = {2008},
month = jul ,
}
@book{ISVC:2008,
title = "Advances in Visual Computing",
author = "Bebis, G. and Boyle, R. and Parvin, B. and Koracin, D. and Remagnino, P. and Porikli,F. and Peters, J. and Klosowski, J. and Arns, L. and Chun, Y.K. and Rhyne, T.-M. and
Monroe, L. (Eds.)",
publisher = " Springer verlag, LNCS 5358",
note =" 4th International Symposium, ISVC 2008, Las Vegas, NV, USA,
December 1-3, 2008, Proceedings, Part I 2008, XLIV",
pages = "1173 p." ,
year = "2008",
isbn = "ISBN: 978-3-540-89638-8",
}
% volume = "xx", number = "xx", pages = "xx--xx",
@book{PetersReif:2008:SS,
AUTHOR = {J.~Peters and U.~Reif},
TITLE = {Subdivision Surfaces},
SERIES = {Geometry and Computing},
VOLUME = {3},
PUBLISHER = {Springer-Verlag},
ADDRESS = {New York},
YEAR = {2008},
pages = "i--204",
}
@phdthesis{spunak:2007,
author = {Sukitti Punak},
title = {Geometrically and Physically Based Modeling for Deformable
Objects Simulating Soft Tissue Interactions in Surgery
Environments},
school = {University of Florida},
year = {2007},
month = nov # "~19",
}
@article{Myles:2008:PBS,
author = {Ashish Myles and K\c{e}stutis Kar\v{c}iauskas and J\"{o}rg
Peters},
title = {Pairs of bi-cubic surface constructions supporting polar
connectivity},
journal = {Comput. Aided Geom. Des.},
volume = {25},
number = {8},
year = {2008},
issn = {0167-8396},
pages = {621--630},
doi = {http://dx.doi.org/10.1016/j.cagd.2008.06.002},
publisher = {Elsevier Science Publishers B. V.},
address = {Amsterdam, The Netherlands, The Netherlands},
}
@InProceedings{Punak:2008:MMVR,
author = "Sukitti Punak and Minho Kim and Ashish Myles and Juan Cendan
and Sergei Kurenov and J{\"o}rg Peters",
title = "Fatty Tissue in a Haptic Illustration Environment",
publisher = "IOS Press, Amsterdam",
organization = "Studies in Health Technology and Informatics (SHTI)",
booktitle = "Proceedings of {M}edicine {M}eets {V}irtual {R}eality
(MMVR) 16, Jan 2008, Long Beach,CA",
pages = "384-386",
year = "2008"
}
@article{Cendan:2007:DME,
author = "J.~Cendan and M.~Kim and S.~Kurenov and J.~Peters",
title = "Developing a multimedia environment
for customized teaching of an adrenalectomy",
journal = "Surg Endosc.",
volume = "21",
number = "6",
pages = "1012--1016",
month = jun,
year = "2007",
}
%Epub 2006 Dec 16.
@InProceedings{Cendan:2008:SGAE,
author = {J.~Cendan and S.~Kurenov and M.~Kim and S.~Punak and J.~Peters},
title = {Toolkit for Illustration
of Procedures in Surgery ({TIPS})},
organization = {Southern Group on Educational Affairs},
booktitle = "Proceedings of SGEA, Nashville, April 3-5, 2008",
pages = " ",
year = "2008"
}
@InProceedings{Punak:2008:MICCAI,
author = {S.~Punak and M.~Kim and J.~Cendan and S.~Kurenov and J.~Peters},
title = {Surgery Illustration with Soft Tissue Interaction},
organization = {MICCAI},
}
@phdthesis{Lutterkort:ENG:2000,
author = {David Lutterkort},
title = {Envelopes of Nonlinear Geometry},
school = {Purdue University},
year = {2000},
month = aug
}
%===============in chronological order =========================
@article{Boehm:1995:GCG,
author = "W. Boehm and H. Prautzsch and Jorg Peters",
title = "Geometric Concepts for Geometric Design",
journal = "SIAM Review",
volume = "37",
number = "3",
pages = "473--??",
month = sep,
year = "1995",
coden = "SIREAD",
ISSN = "0036-1445",
bibdate = "Tue May 13 16:55:17 MDT 1997",
url = "http://www.siam.org/journals/sirev/sirev373.htm",
}
%=======================================================================
@article{Peters:1989:LGH,
author = "J. Peters",
title = "Local generalized Hermite interpolation by quartic
${C}^2$ space curves",
journal = j-TOG,
volume = "8",
number = "3",
pages = "235--242",
year = "1989",
CODEN = "ATGRDF",
ISSN = "0730-0301",
}
@PhdThesis{Peters:1990:FSP,
author = "J. Peters",
title = "Fitting smooth parametric surfaces to {3D} data",
publisher = "Department of Computer Sciences",
school = "University of Wisconsin",
year = "1990",
note = "PhD thesis; see also CMS Technical Report 91-2",
advisor = "Carl de Boor",
}
@article{Peters:1990:LCB,
author = "J. Peters",
title = "Local cubic and bicubic ${C}^1$ surface interpolation
with linearly varying boundary normal",
journal = "Computer Aided Geometric Design",
volume = "7",
pages = "499--515",
year = "1990",
CODEN = "CAGDEX",
ISSN = "0167-8396",
}
@article{Peters:1990:LSS,
author = "J. Peters",
title = "Local smooth surface interpolation: {A}
classification",
journal = "Computer Aided Geometric Design",
volume = "7",
pages = "191--195",
year = "1990",
CODEN = "CAGDEX",
ISSN = "0167-8396",
}
@article{Peters:1990:NSM,
author = "J. Peters",
title = "The network simplex method on a multiprocessor",
journal = j-NETWORKS,
volume = "20",
number = "7",
pages = "845--859",
year = "1990",
CODEN = "NTWKAA",
ISSN = "0028-3045",
}
@article{Peters:1990:SMI,
author = "J. Peters",
title = "Smooth mesh interpolation with cubic patches",
journal = j-CAD,
volume = "22",
number = "2",
pages = "109--120",
year = "1990",
CODEN = "CAIDA5",
ISSN = "0010-4485",
}
@InProceedings{Peters:1991:PSE,
author = "J. Peters",
title = "Parametrizing singularly to enclose vertices by a
smooth parametric surface",
crossref = "MacKay:1991:GIC",
pages = "1--7",
year = "1991",
accept = "acceptance rate 33\%"
}
@article{Peters:1991:SIM,
author = "J. Peters",
title = "Smooth interpolation of a mesh of curves",
journal = j-CONST-APPROX,
volume = "7",
pages = "221--247",
year = "1991",
ISSN = "0176-4276",
accept = "Winner of SIAM Student Paper Competition 1989.",
}
@InProceedings{Peters:1992:IGS,
author = "J. Peters",
booktitle = "Curves and surfaces in computer vision and graphics
III",
title = "Improving ${G}^1$ surface joins by using a composite
patch",
crossref = "Warren:1992:CSC",
pages = "345--354",
year = "1992",
accept = "acceptance rate ca 50\%"
}
@InProceedings{Peters:1992:IHD,
author = "A. Neff and J. Peters",
title = "${C}^1$ interpolation on higher-dimensional analogues
of the 4-direction mesh",
crossref = "Braess:1992:NMA",
pages = "207--220",
year = "1992",
accept = "acceptance rate ca 75\%"
}
@article{Peters:1992:JSP,
author = "J. Peters",
title = "Joining smooth patches at a vertex to form a ${C}^k$
surface",
journal = j-CAGD,
volume = "9",
pages = "387--411",
year = "1992",
CODEN = "CAGDEX",
ISSN = "0167-8396",
}
@article{Peters:1992:SIC,
author = "J. Peters and M. Sitharam",
title = "Stability of interpolation from ${C}^1$ cubics at the
vertices of an underlying triangulation",
journal = j-SIAM-J-NUM-ANAL,
volume = "20",
number = "2",
pages = "528--533",
year = "1992",
}
@article{Peters:1992:SVI,
author = "J. Peters and M. Sitharam",
title = "On stability of $m$-variate ${C}^1$ interpolation",
journal = j-APPROX-THEORY-APPL,
volume = "8",
number = "4",
pages = "17--32",
year = "1992",
ISSN = "1000-9221",
}
@article{Peters:1993:SFF,
author = "J. Peters",
title = "Smooth free-form surfaces over irregular meshes
generalizing quadratic splines",
journal = j-CAGD,
volume = "10",
pages = "347--361",
year = "1993",
CODEN = "CAGDEX",
ISSN = "0167-8396",
mycom = "reparam along tensor-border and across sectors",
}
@InCollection{Hoffmann:1994:GCC,
author = "C. M. Hoffmann and J. Peters",
booktitle = "Mathematical methods in computer aided geometric
design {III}",
title = "Geometric Constraints of {CAGD}",
crossref = "Daehlen:1994:MMC",
pages = "369--376",
year = "1994",
accept = "acceptance rate ca 75\%"
}
@article{Peters:1994:CCM,
author = "J. Peters",
editor = "A. LeM\'ehaut\'e and P. J. Laurent and L. L.
Schumaker",
title = "A characterization of connecting maps as roots of the
identity",
journal = j-CSGD,
pages = "369--376",
year = "1994",
accept = "acceptance rate ca 75\%"
}
@article{Peters:1994:EAE,
author = "J. Peters",
title = "Evaluation and Approximate Evaluation of the
Multivariate {Bernstein-B{\'e}zier} Form on a Regularly
Partitioned Simplex",
journal = j-TOMS,
volume = "20",
number = "4",
pages = "460--480",
month = dec,
year = "1994",
CODEN = "ACMSCU",
ISSN = "0098-3500",
MRclass = "65D17 (65-04)",
MRnumber = "1 368 026",
bibdate = "Tue Mar 14 16:28:34 1995",
URL = "http://www.acm.org/pubs/citations/journals/toms/1994-20-4/p460-peters/",
keywords = "Bernstein-B{\'e}zier form; evaluation; multivariate;
power form; subdivision",
subject = "G.1.2 [Numerical Analysis]: Approximation; I.3.5
[Computer Graphics]: Computational Geometry and Object
Modeling",
}
@InCollection{Peters:1994:SAT,
author = "J. Peters",
title = "Surfaces of arbitrary topology constructed from
biquadratics and bicubics",
crossref = "Sapidis:1994:DFC",
pages = "277--293",
year = "1994",
accept = {acceptance rate ca 50\%}
}
@article{Goodman:1995:BNC,
author = "T. N. T. Goodman and J. Peters",
title = "{B}{\'e}zier nets, convexity and subdivision on higher
dimensional simplices",
journal = j-CAGD,
volume = "12",
pages = "53--65",
year = "1995",
CODEN = "CAGDEX",
ISSN = "0167-8396",
}
@article{Peters:1995:BSS,
author = "J. Peters",
title = "Biquartic {${C}^1$} spline surfaces over irregular meshes",
journal = "Computer-Aided Design",
volume = "27",
number = "12",
year = "1995",
pages= "895--903",
month = dec,
}
@InProceedings{Peters:1996:SBZ,
author = "J. Peters",
booktitle = "The Mathematics of surfaces VI",
title = "${C}^2$ surfaces built from zero sets of the
7-direction box spline",
crossref = "Mullineux:1996:MS",
pages = "463--474",
year = "1996",
bibdate = "Fri Nov 15 10:16:10 EST 1996",
accept = "acceptance rate ca 50\%"
}
@article{Peters:1995:SPM,
author = "J. Peters",
title = "Smoothing polyhedra made easy",
journal = j-TOG,
volume = "14",
number = "2",
pages = "161--169",
month = apr,
year = "1995",
ISSN = "0730-0301",
}
@article{Peters:1995:SS,
author = "J. Peters",
title = "${C}^1$-surface splines",
journal = j-SIAM-J-NUM-ANAL,
volume = "32",
number = "2",
pages = "645--666",
year = "1995",
}
@article{Farouki:1996:SCD,
author = "R. Farouki and J. Peters",
title = "Smooth curve design with double-{Tschirnhaus} cubics",
journal = j-ANN-NUM-MATH,
volume = "3",
year = "1996",
number = "1-4",
month = "Mar",
ISSN = "1021-2655",
pages= "63-82",
}
@article{Peters:1996:CCS,
author = "J. Peters",
title = "Curvature continuous spline surfaces over irregular
meshes",
journal = j-CAGD,
volume = "13",
number = "2",
month = "Feb",
year = "1996",
CODEN = "CAGDEX",
ISSN = "0167-8396",
pages= "101--131",
}
@article{Peters:1996:SSI,
author = "J. Peters",
title = "Spline surfaces from irregular control meshes",
journal = "Zeitschrift f{\"u}r Angewandte Mathematik und
Mechanik",
volume = "76",
number = "1",
month = "",
year = "1996",
note = "Proceedings of ICIAM '95.",
pages= "69--72",
}
@Book{Farin:1997:XX,
editor = "G. Farin",
title = "{XXX}",
publisher = "Springer Verlag, Berlin",
year = "199x",
}
@InProceedings{Gonzalez:1997:IMU,
author = "C. Gonzalez",
booktitle = "1er Encuentro de Computacion, ENC 97",
title = "Interactive Modeling using Surface Splines",
publisher = "Sociedad Mexicana de Ciencia de la Computacion",
pages = "xx--xx",
year = "1997",
note = "Queretaro, Mexico",
}
@InProceedings{Peters:1997:BBI,
author = "J. Peters and M. Wittman",
booktitle = "The Mathematics of surfaces VII",
title = "Blending basic implicit shapes using trivariate box
splines",
crossref = "Goodman:1997:MS",
pages = "409--426",
year = "1997",
bibdate = "Fri Nov 15 10:16:10 EST 1996",
accept = "acceptance rate ca 50\%"
}
@InProceedings{Peters:1997:BSB,
author = "J. Peters and M. Wittman",
editor = "W.~Bronsvort C.~ Hoffmann",
booktitle = "Proceedings of Fourth Symposium on Solid Modeling",
title = "Box-spline based {CSG} blends",
publisher = "ACM Siggraph",
month = "May",
year = "1997",
pages= "195--206",
accept = {acceptance rate 25\%}
}
@article{Peters:1997:CVS,
author = "J. Peters and A. Nasri",
title = "Computing Volumes of Solids Enclosed by Recursive
Subdivision Surfaces",
journal = j-CGF,
volume = "16",
number = "3",
month = sep,
year = "1997",
CODEN = "CGFODY",
ISSN = "0167-7055",
pages= "C89-C94",
}
@article{Peters:1997:IRC,
author = "J. Peters",
title = "Interpolation regions for convex low degree polynomial
curve segments",
journal = j-ADV-COMPUT-MATH,
volume = "6",
number = "1",
year = "1997",
CODEN = "ACMHEX",
ISSN = "1019-7168",
pages= "87--96",
}
@InProceedings{Peters:1997:SPT,
author = "J. Peters",
booktitle = "Geometric Modelling",
title = "Smoothing polyhedra using trimmed bicubic {NURBS}",
editor = "Farin, G. and Bieri, H. and Brunnett, G. and De Rose, T.",
publisher = "Springer Verlag",
note = "Dagstuhl 1996, by invitation",
page = "211--217",
isbn = "-211-83207-6",
year = "1998",
misc = "http://www.springer.de/cgi-bin/search_book.pl?isbn=3-211-83207-6"
}
@article{Peters:1997:SSS,
author = "J. Peters and U. Reif",
title = "The simplest subdivision scheme for smoothing
polyhedra",
journal = j-TOG,
volume = "16",
number = "4",
month = oct,
year = "1997",
CODEN = "ATGRDF",
ISSN = "0730-0301",
pages= "420--431",
}
@article{Gonzalez-Ochoa:1998:CMO,
author = "C. Gonzalez-Ochoa and S. McCammon and J. Peters",
title = "Computing moments of objects enclosed by piecewise
polynomial surfaces",
key = "Animation techniques,CAD/CAM, geometric modeling,
interactive techniques, splines and surfaces, university
education, virtual/interactive environments",
journal = j-TOG,
volume = "17",
number = 3,
month = "July",
year = "1998",
accept = "Submitted: Jun 96, Accepted: Dec 1997,
Published on July 1998",
pages= "143--157",
}
@article{Peters:1998:APF,
author = "J. Peters",
title = "{Algorithm 783}: {Pcp2Nurb} --- smooth free-form
surfacing with linearly trimmed bicubic {B}-splines",
journal = "ACM Transactions on Mathematical Software",
volume = "24",
number = "3",
pages = "261--267",
month = sep,
year = "1998",
coden = "ACMSCU",
ISSN = "0098-3500",
bibdate = "Mon Feb 8 17:51:43 MST 1999",
url = "http://www.acm.org:80/pubs/citations/journals/toms/1998-24-3/p261-peters/",
abstract = "Unrestricted control polyhedra facilitate modeling
free-form surfaces of arbitrary topology and local
patch-layout by allowing {\em n\/}-sided, possibly
nonplanar, facets and {\em m\/}-valent vertices. By
cutting off edges and corners, the smoothing of an
unrestricted control polyhedron can be reduced to the
smoothing of a {\em planar-cut polyhedron\/}. A
planar-cut polyhedron is a generalization of the
well-known tensor-product control structure. The
routine Pcp2Nurb in turn translates planar-cut
polyhedra to a collection of four-sided linearly
trimmed bicubic B-splines and untrimmed biquadratic
B-splines. The routine can thus serve as central
building block for overcoming topological constraints
in the mathematical modeling of smooth surfaces that
are stored, transmitted, and rendered using only the
standard representation in industry. Specifically, on
input of a nine-point subnet of a planar-cut
polyhedron, the routine outputs a trimmed bicubic NURBS
patch. If the subnet does not have geometrically
redundant edges, this patch joins smoothly with patches
from adjacent subnets as a four-sided piece of a
regular {\em C1\/} surface. The patch integrates
smoothly with untrimmed biquadratic tensor-product
surfaces derived from subnets with tensor-product
structure. Sharp features can be retained in this
representation by using geometrically redundant edges
in the planar-cut polyhedron. The resulting surface
follows the outlines of the planar-cut polyhedron in
the manner traditional tensor-product splines follow
the outline of their rectilinear control polyhedron. In
particular, it stays in the local convex hull of the
planar-cut polyhedron.",
acknowledgement = ack-nhfb,
keywords = "algorithms",
subject = "{\bf I.3.5} Computing Methodologies, COMPUTER
GRAPHICS, Computational Geometry and Object Modeling,
Splines. {\bf D.3.2} Software, PROGRAMMING LANGUAGES,
Language Classifications, C. {\bf G.1.1} Mathematics of
Computing, NUMERICAL ANALYSIS, Interpolation, Spline
and piecewise polynomial interpolation. {\bf G.1.2}
Mathematics of Computing, NUMERICAL ANALYSIS,
Approximation, Spline and piecewise polynomial
approximation. {\bf I.3.5} Computing Methodologies,
COMPUTER GRAPHICS, Computational Geometry and Object
Modeling, Boundary representations.",
}
@Misc{Gonzalez:1998:TH,
author = "C. Gonzalez and J. Peters",
title = "The topological house",
publisher = "VideoMath Festival at international congress of
mathematicians ICM 98",
address = "Berlin, Germany",
year = "1998",
accept = "Videotape featured at VideoMath 98, Berlin,
acceptance rate 50\%",
URL = "http://www-sfb288.math.tu-berlin.de/VideoMath/program/page27.html",
}
@article{Peters:1998:AGB,
author = "J. Peters and U. Reif",
title = "Analysis of generalized {B}-spline subdivision
algorithms",
journal = j-SIAM-J-NUM-ANAL,
volume = "35",
number = "2",
month = apr,
year = "1998",
pages= "728--748",
abstract = "First complete analysis of Catmull-Clark and Doo-Sabin subdivision;
defined the general toolkit for analyzing spline subdivision surfaces
at extraordinary points."
}
@article{Peters:1998:ECQ,
author = "J. Peters and U. Reif",
title = "The 42 equivalence classes of quadratic surfaces in
affine n-space",
journal = j-CAGD,
volume = "15",
year = "1998",
CODEN = "CAGDEX",
ISSN = "0167-8396",
pages= "459--473",
}
@TechReport{Peters:1998:PS,
author = "J. Peters and L. Kobbelt",
title = "The Platonic Spheroids",
number = "97-052",
institution = "Dept of Computer Sciences, Purdue University",
year = "1998",
}
@article{Nairn:1999:SQB,
author = "D. Nairn and J. Peters and D. Lutterkort",
title = "Sharp, quantitative bounds on the distance between a
polynomial piece and its {B{\'e}zier} control polygon",
journal = j-CAGD,
volume = "16",
number = "7",
month = "Aug",
year = "1999",
CODEN = "CAGDEX",
ISSN = "0167-8396",
pages= "613-633",
abstract = "Pioneered the study of the exact (non-asymptotic) distance between
nonlinear functions and their control structures."
}
@InProceedings{Peters:1998:PSS,
author = "J. Peters",
title = "Some properties of subdivision derived from splines",
booktitle = "Subdivision for modeling and animation",
crossref = "Sig98:course:1998",
pages = "83--90",
year = "1998",
}
@InProceedings{Gonzalez:1999:IDB,
title = {Localized Hierarchy Surface Splines},
booktitle = {ACM Symposium on Interactive 3D Graphics},
author = {C. Gonzalez and J. Peters},
year = 1999,
page = {7--15},
editor = {J. Rossignac, S.N. Spencer},
journal = {http://www.gvu.gatech.edu/gvu/i3dg/papers.html},
accept = {acceptance rate 31\%},
abstract = "First (?) hierarchical spline modeling system that
allows for change of topology at and between each level of refinement."
}
%note = {ca 30 percent acceptance rate},
%title = {Interactive Design based on Hierarchical Surface Splines},
@article{Lutterkort:1999:PDR,
author = "D. Lutterkort and J. Peters and U. Reif",
title = {Polynomial degree reduction in the ${L}_2$-norm equals best
{E}uclidean approximation of {B}\'ezier coefficients},
journal = j-CAGD,
volume = "16",
number = "7",
month = "Aug",
year = "1999",
CODEN = "CAGDEX",
pages= "607-612",
}
@InProceedings{Lutterkort:1999:SPP,
author = "D. Lutterkort and J. Peters",
title = "Smooth paths in a polygonal channel",
booktitle = "Proceedings of the 15th annual symposium on Computational
Geometry",
pages = "316--321",
year = "1999",
accept = {acceptance rate 39\%}
}
%---------need pages etc
@article{Lutterkort:2001:TLB,
author = "D. Lutterkort and J. Peters",
title = {Tight Linear bounds on the distance between a spline
and its {B}-spline control polygon},
journal = j-NM,
volume = "89",
month = "May",
year = "2001",
pages= "735-748",
misc = "1 year backlog, accepted Oct 1999",
}
@article{Peters:2000:MLS,
author = "J. Peters and U. Reif",
title = {
Least squares approximation
of {B}\'ezier coefficients
provides best degree
reduction in the ${L}_2$-norm },
journal = j-AT,
volume = "104",
number = "1",
month = "May",
year = "2000",
pages= "90-97",
}
@InProceedings{Peters:2000:PCC,
pages = "255--258",
year = "2000",
title = "Patching {C}atmull-{C}lark Meshes",
url = "http://visinfo.zib.de/EVlib/Show?EVL-2000-62",
author = "J. Peters",
abstract = "Named after the title, the PCCM transformation is a
simple, explicit algorithm that creates large, smoothly
joining bicubic Nurbs patches from a refined
Catmull-Clark subdivision mesh. The resulting patches
are maximally large in the sense that one patch
corresponds to one quadrilateral facet of the initial,
coarsest quadrilateral mesh before subdivision. The
patches join parametrically C2 and agree with the
Catmull-Clark limit surface except in the immediate
neighborhood of extraordinary mesh nodes; in such a
neighborhood they join at least with tangent continuity
and interpolate the limit of the extraordinary mesh
node. The PCCM transformation integrates naturally with
array-based implementations of subdivision surfaces.",
editor = "Kurt Akeley",
keywords = "CAD, Curves & Surfaces, Geometric Modeling",
series = "Annual Conference Series",
booktitle = "Siggraph 2000, Computer Graphics Proceedings",
publisher = "ACM Press / ACM SIGGRAPH / Addison Wesley Longman",
accept = {acceptance rate 25\%}
}
@techreport{Peters:2000:ModPCC,
author = "J. Peters",
year = "2001",
title = "Modifications of {PCCM}",
institution = "Dept CISE, University of Florida",
number = "2001-001",
pages = "1--2",
}
@article{Peters:2001:PCC,
author = "J. Peters and G. Umlauf",
title = {Computing curvature bounds for bounded curvature subdivi
sion},
journal = j-CAGD,
number = "5",
volume = "18",
year = "2001",
pages= "455-462",
}
@InProceedings{Lutterkort:2000:LEU,
author = "D. Lutterkort and J. Peters",
title = {Linear Envelopes for Uniform {B}--spline Curves},
booktitle = "Curves and Surfaces, St Malo",
pages = "239--246",
year = "2000",
accept = "acceptance rate ca 75\%"
}
@InProceedings{Peters:2000:GMC,
author = "J. Peters and G. Umlauf",
title = {Gaussian and Mean Curvature of Subdivision Surfaces},
booktitle = "The Mathematics of Surfaces IX",
editor = "R.~Cipolla and R.~Martin",
publisher = "Springer",
pages = "59--69",
year = "2000",
accept = "acceptance rate ca 50\%"
}
@article{Peters:2001:SPR,
author = "J. Peters",
title = "Smooth Patching of Refined Triangulations",
journal = j-TOG,
volume = "20",
number = "1",
pages = "1--9",
year = "2001",
}
@article{Lutterkort:2000:ETP,
author = "D. Lutterkort and J. Peters",
title = "Optimized Refinable Enclosures of
Multivariate Polynomial Pieces",
journal = j-CAGD,
volume = "18",
number = "9",
pages = "851--863",
year = "2002",
}
@TechReport{Peters:2000:PNQ,
author = "Jorg Peters",
title = "{PN} Quads",
pages = "1--2",
year = "2000",
institution = "University of Florida, CISE",
}
@InProceedings{Vlachos:2000:CPNT,
author = "Alex Vlachos and Jorg Peters and Chas Boyd and Jason L. Mitchell",
title = "Curved {PN} Triangles",
pages = "159--166",
year = "2001",
series = "Bi-Annual Conference Series",
booktitle = "2001, Symposium on Interactive 3D Graphics",
publisher = "ACM Press",
accept = {acceptance rate 37\%},
abstract = "Defines the N-patches of the DX8 graphics standard;
widely used by computer game artists."
}
@article{Peters:2002:CFF,
author = "J. Peters",
title = "${C}^2$ Free-Form Surfaces of degree (3,5)",
journal = j-CAGD,
volume = "19",
number = "2",
pages = "113--126",
year = "2002",
abstract = "Lowest-degree, piecewise polynomial curvature continuous
surface construction to date."
}
@InProceedings{Peters:2002:GC,
author = "J. Peters",
title = "Geometric Continuity",
year = "2002",
editors = "G.~Farin, J.~Hoschek, M.~Kim",
booktitle = "Handbook of Computer Aided Geometric Design",
pages = "193-229",
publisher = "Elsevier",
abstract = "Survey ('definitive account') of concepts and use of geometric continuity
in geometric design."
}
@article{Peters:200x:SE,
author = "J. Peters",
title = "Surface Envelopes",
journal = "CISE TR 01-2001",
year = "2001",
note = "http://www.cise.ufl.edu/research/SurfLab/papers/"
}
%====2003===============================================================
@article{Shiue:2003:MMP,
author = "L.J. Shiue and J. Peters",
title = "Mesh mutation in programmable graphics hardware",
journal = "Eurographics/Siggraph Hardware Workshop",
year = "2003",
pages= "1:10",
note = "http://www.cise.ufl.edu/research/SurfLab/papers/"
}
@InProceedings{Peters:2003:OPL,
author = "J. Peters and X. Wu",
title = "On the optimality of piecewise linear max-norm enclosures
based on slefes",
year = "2003",
pages = " ",
editor = " L. L. Schumaker",
booktitle = "Proc. Curves and Surfaces, St Malo 2002",
publisher = "Vanderbilt Press"
}
@InProceedings{Peters:2003:SFN,
author = "J. Peters",
title = "Smoothness, Fairness and the need for better multi-sided patches",
year = "2003",
editor = " R Goldman and R. Krasauskas ",
booktitle = "Topics in Algebraic Geometry and Geometric Modeling",
publisher = "American Mathematical Society",
series = "Contemporary Mathematics",
number = "334",
page = "55-64"
}
@InProceedings{Peters:2003:EOS,
author = "J. Peters",
title = "Efficient One-sided linearization of spline geometry",
year = "2003",
pages = "297--319",
editor = "M.J. Wilson and R.R. Martin",
booktitle = "Mathematics of Surfaces X",
publisher = "IMA"
}
@InProceedings{lutterkort:1999:OSP,
author = "D.~Lutterkort and J. Peters",
title = "One-sided Smoothing of Polygons",
year = "1999",
booktitle = "ACM Symposium on Computational Geometry, U of Miami",
}
%====2004===============================================================
%COMAID882
@article{Peters:2004:SLE,
author = "J. Peters and X. Wu",
title = "SLEVEs for planar spline curves",
journal = "Computer Aided Geometric Design",
year = "2004",
volume = "21",
number = "6",
pages= "615--635",
url = "http://authors.elsevier.com/sd/article/S0167839604000615"
}
@article{Myles:2004:TST,
author = "Ashish Myles and J{\"o}rg Peters",
title = "Threading splines through {3D} channels",
journal = "Computer Aided Design",
volume = "37",
number = "2",
year = "2004",
pages= "139--148",
}
@article{Peters:2004:DRF,
author = "J. Peters and L.J. Shiue",
title = "Combining 4- and 3-direction Subdivision",
journal = "ACM TOG",
year = "2004",
volume = "23",
number = "4",
pages= "980:1003",
}
% title = "4-3 directionally ripple-free subdivision",
% note = "http://www.cise.ufl.edu/research/SurfLab/papers/"
@article{Peters:2004:SCS,
author = "J. Peters and U. Reif",
title = "Shape Characterization of Subdivision Surfaces --
Basic Principles",
journal = j-CAGD,
volume = "21",
number = "6",
month = "july",
year = "2004",
pages= "585--599",
abstract = "Characterization of effect of subsubdominant eigenvalues
and vectors on subdivision surfaces. Definition of hybrid shape."
}
%-----COMAID883
@article{Karciauskas:2004:SCS,
author = "K.~Karciauskas and J. Peters and U. Reif",
title = "Shape Characterization of Subdivision Surfaces --
Case Studies",
journal = j-CAGD,
volume = "21",
number = "6",
month = "july",
year = "2004",
pages= "601--614",
}
%note = "http://authors.elsevier.com/sd/article/S0167839604000627"
@article{Wu:2004:IDS,
author = "X. Wu and J. Peters",
title = "Interference Detection for Subdivision Surfaces",
journal = "Computer Graphics Forum, Eurographics 2004",
volume = "23",
number = "3",
year = "2004",
pages= "577--585",
accept = "acceptance rate ca 18\%",
}
@InProceedings{Karciauskas:2004:PCS,
author = "K.~Karciauskas and J. Peters",
title = "Polynomial ${C}^2$ spline surfaces guided by rational
multisided patches",
year = "2004",
editor = "B. J{\"u}ttler,Tor Dokken",
booktitle = "Computational Methods for Algebraic Spline
Surfaces, Sept 29 -- Oct 3 2003, Kefermarkt, Austria",
publisher = "Springer",
pages = "119--134",
}
@InProceedings{Peters:2004:PCS,
author = "J. Peters",
title = "Mid-Structures of
Subdividable Linear Efficient Function Enclosures
Linking Curved and Linear Geometry",
year = "2004",
editor = "Miriam Lucian and Marian Neamtu",
booktitle = "Proceedings of SIAM conference, Seattle, Nov 2003",
publisher = "Nashboro",
page = "1--10"
}
@misc{Shiue-2004-Phd,
author = {Le-Jeng Shiue},
title = {Quasi-regular Surface Representation},
year = {2004},
note = {Ph.D's Dissertation, Department of Computer and Information
Science and Engineering, University of Florida}
}
@InProceedings{Shiue-2004-CGAL,
author = {Le-Jeng Shiue and Pierre Alliez and Radu Ursu and Lutz
Kettner},
title = {A Tutorial on CGAL Polyhedron for Subdivision Algorithms},
year = {2004},
booktitle = {2nd CGAL User Workshop},
note = {http://www.cgal.org/Tutorials/Polyhedron/}
}
%====2005===============================================================
@InProceedings{Shiue-2005-MRLGD,
author = {Le-Jeng Shiue and J{{\"o}}rg Peters},
title = {A Mesh Refinement Library based on Generic Design},
booktitle = {Proceedings of the 43rd Annual ACM Southeast Conference},
year = {2005},
pages = {1-104--1-108},
}
%title = "A Pattern-based Data Structure for Manipulating
%Meshes with Regular Regions",
%05loopnorm
%05nor_uml_X
@InProceedings{Ginkel:2005:NCN,
author = "I. Ginkel and J. Peters and G. Umlauf",
booktitle = "The Mathematics of surfaces XI",
editors = "R. Martin and H. Bez and M. Sabin",
title = "On Normals and Control Nets",
pages = "233--239",
year = "2005",
accept = "acceptance rate ca 50\%"
}
%05nor_uml
@article{Ginkel:2006:NSS,
author = "I. Ginkel and J. Peters and G. Umlauf",
title = "Normals of Subdivision Surfaces and their Control
Polyhedra",
journal = "Computer-Aided Geometric Design",
volume = "24",
number = "2",
month = "Feb",
year = "2007",
pages= "112--116",
}
%04hwSub
@InProceedings{Shieu:2005:PCC,
pages = "1010--1015",
year = "2005",
title = "A Realtime {GPU} Subdivision Kernel",
author = "Le-Jeng Shiue and Ian Jones and J. Peters",
editor = "Marcus Gross",
series = "Annual Conference Series",
booktitle = "Siggraph 2005, Computer Graphics Proceedings",
publisher = "ACM Press / ACM SIGGRAPH / Addison Wesley Longman",
accept = {acceptance rate ca 15\%}
}
%CHECK
%04pmesh
@InProceedings{Shiue:2005:PMESH,
author = "Le-Jeng Shiue and Jorg Peters",
booktitle = "Proceedings of Graphics Interface 2005",
title = "A Pattern-based Data Structure for Manipulating
Meshes with Regular Regions",
pages = "153--160",
year = "2005",
accept = "acceptance rate ca 25\%"
}
% CHECK
% 04eo
@InProceedings{Shiue:2005:EC,
author = "Le-Jeng Shiue and Jorg Peters",
booktitle = "Proceedings of The International Conference on Shape
Modeling and Applications 2005",
title = "Mesh Refinement based on Euler Encoding",
pages = "343--348",
year = "2005",
accept = "short paper, acceptance rate ca 50\%"
}
%04AdaptiveSub
@InProceedings{Wu:2005:AEM,
author = "X. Wu and J. Peters",
booktitle = "Proceedings of The International Conference on Shape
Modeling and Applications 2005",
title = "An Accurate Error Measure for Adaptive Subdivision
Surfaces",
pages = "51--57",
year = "2005",
}
@InProceedings{Reif:2005:SAS,
author = "U. Reif and J. Peters",
booktitle = "Structural Analysis of Subdivision Surfaces -- A
Summary",
title = "Topics in Multivariate Approximation and
Interpolation",
publisher = "Elsevier Science Ltd",
editor = "K. Jetter et al.",
pages = "149--190",
year = "2005",
}
@InProceedings{Sitharam:2004:COA,
author = {Meera Sitharam and J{{\"o}}rg Peters and Yong Zhou},
title = {Combinatorial Optimization of Algebraic Complexity},
booktitle = {Automated Deduction in Geometry, ADG 2004},
year = {2004},
pages = {1-2},
note = "refereed conference talk and extended abstract",
}
@InProceedings{Peters:2005:ANC,
author = {J{{\"o}}rg Peters and Meera Sitharam and Yong Zhou and JianHua Fan},
title = {Algebraic and Numeric Challenges in Modeling Virus Formation},
booktitle = {Presentation at Florida Bioinformatics Workshop 2005},
year = {2005},
note = {poster},
}
@InProceedings{Peters:2005:EGR,
author = {J{{\"o}}rg Peters and Meera Sitharam and Yong Zhou and JianHua Fan},
title = {Elimination in generically rigid 3{\sf D} geometric constraint
systems},
booktitle = {Proceedings of Algebraic Geometry and Geometric
Modeling,Nice, 27-29 September 2004},
year = {2005},
publisher = "Springer Verlag",
pages = {xx+1--16},
}
%--------done before but published in 2006 ----------------
@article{Karciauskas:2006:CTM,
author = "K. Kar{\v c}iauskas and J. Peters",
title = {Concentric Tesselation Maps and Curvature Continuous
Guided Surfaces},
journal = j-CAGD,
volume = "24",
number = "2",
month = "Feb",
year = "2007",
pages= "99--111",
abstract = "Introduces the theory and several practical versions
of Guided Subdivision.",
mytag = "06ct"
}
@InProceedings{Myles:2006:FSS,
author = "Ashish Myles and J{\"o}rg Peters",
title = "Fast Safe Spline Surrogates for Large Point Clouds",
booktitle = "Proceedings Third International Symposium on 3D Data
Processing, Visualization and Transmission, UNC, Chapel Hill, USA",
month = "June 14-16",
year = "2006",
pages= "61--69",
}
% Siggraph poster 2006, Also Minho poster
@InProceedings{Peters:2005:xx,
author = "J. Peters and S. Punak",
title = "",
volume = "xx",
number = "x",
month = "xx",
year = "2005",
pages= "xx--xx",
note = "Siggraph poster"
}
@article{Kar:2006:SPS,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Surfaces with Polar Structure",
journal = "Computing",
volume = "79",
pages = "309--315",
month = "March",
year = "2007"
}
%05siam_xwu
@article{Wu:2005:LLI,
author = "J. Peters and X. Wu",
title = "On the Local Linear Independence of Generalized Subdivision
Functions",
journal = "SIAM J. Numer. Anal.",
volume = "44",
number = "6",
pages = "2389--2407",
month = "December",
year = "2006",
abstract = "Gives an example that the functions associated
with the control points of a Catmull-Clark surface need not be linearly
independent."
}
@InProceedings{Kim:2006:MMVR,
author = "Minho Kim and Sukitti Punak and Juan Cendan
and Sergei Kurenov and J{{\"o}}rg Peters",
title = "Exploiting Graphics Hardware for Haptic Authoring",
publisher = "IOS Press, Amsterdam",
organization = "Studies in Health Technology and Informatics (SHTI)",
booktitle = "Proceedings of {M}edicine {M}eets {V}irtual {R}eality
(MMVR) 14, Jan 25-27 2006, Long Beach,CA",
pages = "255--260",
year = "2006"
}
@InProceedings{Kim:2007:MMVR,
author = "Minho Kim and Tianyun Ni and Juan Cendan
and Sergei Kurenov and J{{\"o}}rg Peters",
title = "A Haptic-enabled Toolkit for Illustration of Procedures in
Surgery ({TIPS})",
publisher = "IOS Press, Amsterdam",
organization = "Studies in Health Technology and Informatics (SHTI)",
booktitle = "Proceedings of {M}edicine {M}eets {V}irtual {R}eality
(MMVR) 15, Feb 6-9 2007, Long Beach,CA",
pages = "209--214",
year = "2007"
}
%GMP received 84 submissions. 36 submissions have been accepted
%as a regular paper (14 proceedings pages) with a 25 min presentation
% and 21 submissions have been accepted as a short paper (7 proceedings pages)
% with a poster presentation. The GMP2006 proceedings will be published as
%a volume of the Springer Lecture Notes in Computer Science (LNCS).
@InProceedings{Cendan:2006:MME,
author = "JC. Cendan and S. Kurenov and S. Punak and M. Kim and
J. Peters",
title = "Multimedia Environment for Customized Teaching of Surgical
Procedures",
organization = "SAGES 2006 Emerging Technology Session, Dallas TX.
4/29/2006",
year = "2006",
}
%Dallas TX. 4/29/2006. Poster Session.
@article{Cendan:2006:DMM,
author = "Cendan JC and Kim, M. and Kurenov S and Peters J.",
title = "Developing a Multimedia
Environment for Customized Teaching of the Adrenalectomy Surgical
Procedure",
journal = "Surgical Endoscopy",
pages = "10.1007/s00464-006-9119-2",
month = "Dec",
year = "2006",
}
@article{Kurenov:2006:STA,
author = "Sergei N. Kurenov and Sukitti Punak and Minho Kim and Jorg Peters
and Juan C. Cendan",
title = "Simulation for Training with the Autosuture Endo Stitch Device",
journal = "Surgical Innovation",
volume = "13",
number = "4",
year = "December 2006",
pages = "1--5",
}
@InProceedings{Ni:2006:TTQ,
author = "Tianyun Ni and Ahmad H. Nasri and J.~Peters",
title = "Tuned Ternary Quad Subdivision",
organization = "Springer Lecture Notes in Computer Science (LNCS)",
publisher = "Springer Verlag",
booktitle = {Geometric Modeling and
Processing 2006, July 26 - 28, 2006, Pittsburgh, Pennsylvania},
pages = "xx--xx",
year = "2006",
}
% 05subConv_xwu == 06eur
@article{Ni:2007:TSQ,
author = "Tianyun Ni and Ahmad H. Nasri and J.~Peters",
title = "Ternary Subdivision for Quadrilateral Meshes",
journal = "Computer Aided Geometric Design",
volume = "24",
number = "6",
pages = "361-370",
year = "Aug 2007",
url =
"http://portal.acm.org/citation.cfm?id=1275271.1275416&coll=GUIDE&dl=ACM&CFID=15151515&CFTOKEN=6184618"
}
@article{Peters:2006:NSD,
author = "J. Peters and X. Wu",
title = "The Distance of a Subdivision Surface to its Control Polyhedron",
volume = "161",
year = "2009",
journal = "Journal of Approximation Theory",
pages = "491–507",
abb = "YJATH4354",
}
%%%title = "Net-to-Surface Distance of Subdivision Functions",
@InProceedings{Gao:2008:PIP,
author = "Jianwei Gao and Eric Ford and J.~Peters",
title = "Parallel Integration of Planetary Systems on {GPU}s",
booktitle = "Proceedings of ACMSE 2008",
pages = "paper 77",
year = "2008",
}
@InProceedings{Myles:2007:ECC,
author = "Ashish Myles and K\c{e}stutis Kar{\v c}iauskas and J{{\"o}}rg
Peters",
title = "Extending {C}atmull-{C}lark Subdivision and {PCCM} with Polar
Structures",
booktitle = {PG '07: Proceedings of the 15th Pacific Conference on
Computer Graphics and Applications},
year = {2007},
isbn = {0-7695-3009-5},
pages = {313--320},
doi = {http://dx.doi.org/10.1109/PG.2007.24},
publisher = {IEEE Computer Society},
address = {Washington, DC, USA},
}
% author = "A.~Myles and K. Kar{\v c}iauskas and J. Peters",
% title = "Extending {C}atmull-{C}lark Subdivision and {PCCM} with
% {P}olar {S}tructures",
% booktitle = "Proceedings of Pacific Graphics, xxx 2007, Hawaii",
% publisher = "ACM Press",
% editor = "Tao Ju and xxx ",
% pages = "xx--180",
% year = "2008"
}
@InProceedings{KKK:2006:PJS,
author = "K\c{e}stutis Kar{\v c}iauskas and Ashish Myles and J{\"o}rg Peters",
title = "A {$C^2$} Polar Jet Subdivision",
booktitle = "Proceedings of Symposium of Graphics Processing (SGP),
June 26-28 2006, Cagliari, Italy",
publisher = "ACM Press",
editor = "A.~Scheffer and K.~Polthier",
pages = "173--180",
year = "2006",
abstract = "Defines the first polar subdivision scheme and the first
$C^2$ subdivision scheme. It is a form of jet-based subdivision, i.e.\
instead of averaging control points to obtain a refined set of control points,
it maps sets of derivatives to sets of derivatives."
}
@article{KKK:2007:BPS,
author = {K\c{e}stutis Kar\v{c}iauskas and J\"{o}rg Peters},
title = {Bicubic polar subdivision},
journal = {ACM Trans. Graph.},
volume = {26},
number = {4},
year = {2007},
pages = {14},
publisher = {ACM},
address = {New York, NY, USA},
}
%21 of 79
@InProceedings{Picheny:2006:CEP,
author = " V. Picheny and N. Kim and R. Haftka and J. Peters",
title = "Conservative Estimation of Probability of Failure",
booktitle = "11th AIAA/ISSMO Multidisciplinary Analysis
and Optimization Conference",
publisher = "",
editor = "",
pages = "AIAA-2006-7038",
year = "2006",
}
% AIAA-2006-7038
@InProceedings{Peters:2006:AFC,
author = " J. Peters and Raphael Haftka and Sukitti Punak and JianHua Fan",
title = "Algebraic and Feasibility Constraints in Engineering Design",
booktitle = "DMII grantees conference, St.~Louis",
publisher = "",
editor = "",
pages = "",
year = "2006",
}
@InProceedings{Karciauskas:2007:PTG,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Parameterization Transition
for Guided ${C}^2$ Surfaces of Low Degree",
booktitle = "Sixth AFA Conference on Curves and Surfaces
Avignon, June 29-July 5, 2006",
pages= "183--192",
month = "April",
year = "2007"
}
@InProceedings{Karciauskas:2007:V123,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Guided ${C}^2$ Spline Surfaces with {V}-shaped tessellation",
booktitle = "Mathematics of Surfaces",
editor = "J. Winkler and R. Martin",
year = "2007",
pages= "233--244",
}
@TechReport{KP:200a:GS,
author = {K.~Kar{\v c}iauskas and J.~Peters},
title = {Guided Subdivision},
number = "2008-464",
institution = "Dept CISE, University of Florida",
year = "2008",
note = {posted since 2005 at http://www.cise.ufl.edu/research/SurfLab/papers.shtml}
}
@article{Karciauskas:2007:CGS,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "On the curvature of guided surfaces",
volume = "25",
number = "2",
journal = "Computer Aided Geometric Design",
pages = "69--79",
month = "Feb",
year = "2008",
}
%--------------------------------------------------------------------
@article{Karciauskas:2007:GSS,
author = "K. Kar{\v c}iauskas and J. Peters",
title = "Guided spline surfaces",
journal = "Computer Aided Geometric Design",
volume = "26",
number = "1",
pages = "105 - 116",
year = "2009",
issn = "0167-8396",
doi = "DOI: 10.1016/j.cagd.2007.12.002",
url = "http://www.sciencedirect.com/science/article/B6TYN-4RC2NG8-1/2/31bede2eac7ffca46146f6cf242b61d3",
mytag = "05guiCap"
}
@InProceedings{Kim:2008:BSRconf,
author = "M.~Kim and R.~Entezari and J.~Peters",
title = "Box Spline Reconstruction On The Face-Centered Cubic
Lattice",
booktitle = "IEEE Visualization Conference (VIS 2008), Oct 19-24",
publisher = "IEEE Computer Society",
year = "2008",
pages = "xx",
}
@article{Kim:2008:BSR,
author = {Minho Kim and Alireza Entezari and J{\"o}rg Peters},
title = {Box Spline Reconstruction On The Face-Centered Cubic Lattice},
journal ={IEEE Transactions on Visualization and Computer Graphics},
volume = {14},
number = {6},
issn = {1077-2626},
year = {2008},
pages = {1523-1530},
doi = {http://doi.ieeecomputersociety.org/10.1109/TVCG.2008.115},
publisher = {IEEE Computer Society},
address = {Los Alamitos, CA, USA},
}
@article{Yeo:2008:PSQ,
author = {Young In Yeo and Tianyun Ni and Ashish Myles
and Vineet Goel and J{\"o}rg Peters},
title = "Parallel Smoothing of Quad Meshes",
journal = "The Visual Computer",
pages = "757-769",
volume = 25,
issue = 8,
month = Aug,
year = 2009,
}
@article{YNMGP:2009:parallel,
author = {Young In Yeo and Tianyun Ni and Ashish Myles and Vineet Goel and J{{\"o}}rg Peters},
title = {Parallel Smoothing of Quad Meshes},
journal = {The Visual Computer},
volume = {25},
number = {8},
year = {2009},
pages = {757--769},
ee = {http://dx.doi.org/10.1007/s00371-009-0365-x},
}
@InProceedings{Ni:2008:GSQ,
author = "T.~Ni and Y.~Yeo and A.~Myles and V.~Goel and J.~Peters",
title = "{GPU} Smoothing of Quad Meshes",
booktitle = "IEEE International Conference on
Shape Modeling and Applications, June 4 - 6, 2008,
Stony Brook University, Stony Brook, New York, USA",
publisher = "ACM Press",
editor = "M.~Spagnuolo and D.~Cohen-Or and X.D.~Gu",
pages = "3--10",
year = "2008"
}
@InProceedings{Myles:2008:GCQ,
author = "A.~Myles and Y.~Yeo and J.~Peters",
title = "{GPU} Conversion of Quad Meshes to Smooth Surfaces",
booktitle = "ACM Solid and Physical Modeling Symposium, June 2 - 4,
2008,Stony Brook University, Stony Brook, New York, USA",
publisher = "ACM Press",
editor = "D.~Manocha and B.~Levy and H.~Suzuki",
pages = "321--326",
year = "2008"
}
@InProceedings{Myles:2008:FPC,
author = "A.~Myles and T.~Ni and J.~Peters",
title = "Fast Parallel Construction of Smooth Surfaces from Meshes with
Tri/Quad/Pent Facets",
booktitle = "Symposium on Geometry Processing, July 2 - 4,
2008, Copenhagen, Denmark",
publisher = "Blackwell",
editor = " ",
pages = "1-8",
year = "2008"
}
@TechReport{Kim:2008:PJS,
author = "M.~Kim and J{\"o}rg Peters",
title = "Isotropic Box-splines on the An* lattice",
number = "2008-440",
institution = "Dept CISE, University of Florida",
year = "2008",
}
%======================================================================ADD=
% Cross-referenced entries must come last:
@Proceedings{MacKay:1991:GIC,
editor = "S. MacKay and E. M. Kidd",
booktitle = "Graphics Interface '91, Calgary, Alberta, 3--7 June
1991: proceedings",
title = "Graphics Interface '91, Calgary, Alberta, 3--7 June
1991: proceedings",
publisher = pub-CIPS,
address = pub-CIPS:adr,
pages = "xi + 287",
year = "1991",
ISBN = "0-9695338-0-2",
LCCN = "T385.P792 1991",
bibdate = "Tue Dec 19 16:21:47 MST 1995",
}
@Book{Braess:1992:NMA,
editor = "D. Braess and L. L. Schumaker",
booktitle = "Numerical methods in approximation theory, Volume 9",
title = "Numerical methods in approximation theory, Volume 9",
volume = "105",
publisher = pub-BH,
address = pub-BH:adr,
pages = "xiv + 357",
year = "1992",
ISBN = "3-7643-2746-4 (Basel), 0-8176-2746-4 (Boston)",
LCCN = "QA221 .N84 1992",
bibdate = "Tue Dec 19 15:51:50 1995",
series = "International series of numerical mathematics",
}
@Proceedings{Warren:1992:CSC,
editor = "Joseph D. Warren",
booktitle = "Curves and surfaces in computer vision and graphics
III: 16--18 November 1992, Boston, Massachusetts",
title = "Curves and surfaces in computer vision and graphics
{III}: 16--18 November 1992, Boston, Massachusetts",
volume = "1830",
publisher = "SPIE, International Society for Optical Engineering",
address = "Bellingham, WA, USA",
pages = "ix + 355",
year = "1992",
ISBN = "0-8194-1031-4",
LCCN = "T385 .C874 1992",
bibdate = "Tue Dec 19 15:51:50 1995",
series = "Proceedings of SPIE---the International Society for
Optical Engineering",
}
@Proceedings{Daehlen:1994:MMC,
editor = "M. D{\ae}hlen and T. Lyche and L. L. Schumaker",
booktitle = "Mathematical methods in computer aided geometric
design {III}",
title = "Mathematical methods in computer aided geometric
design {III}",
publisher = "Vanderbilt University Press",
address = "Nashville, TN, USA",
pages = "v + 578",
year = "1994",
ISBN = "0-8265-1268-2",
LCCN = "QA565 .M37 1995",
bibdate = "Mon Sep 21 11:23:21 1998",
}
@Book{Sapidis:1994:DFC,
editor = "Nickolas S. Sapidis",
booktitle = "Designing fair curves and surfaces: shape quality in
geometric modeling and computer-aided design",
title = "Designing fair curves and surfaces: shape quality in
geometric modeling and computer-aided design",
publisher = pub-SIAM,
address = pub-SIAM:adr,
pages = "xii + 318",
year = "1994",
ISBN = "0-89871-332-3",
LCCN = "QA567 .D47 1994",
bibdate = "Tue Dec 19 16:04:29 1995",
}
@Proceedings{Mullineux:1996:MS,
editor = "Glen Mullineux",
booktitle = "The Mathematics of surfaces {VI}: based on the
proceedings of a conference organized by the Institute
of Mathematics and Its Applications on the mathematics
of surfaces, held at Brunel University in September
1994",
title = "The Mathematics of surfaces {VI}: based on the
proceedings of a conference organized by the Institute
of Mathematics and Its Applications on the mathematics
of surfaces, held at Brunel University in September
1994",
publisher = pub-CLARENDON,
address = pub-CLARENDON:adr,
pages = "vii + 569",
year = "1996",
ISBN = "0-19-851198-1",
LCCN = "QA571.M3853 1996",
}
@Proceedings{Goodman:1997:MS,
editor = "Tim N. T. Goodman and Ralph R. Martin",
booktitle = "The Mathematics of surfaces {VII}: Proceedings of the
Mathematics of Surfaces VII Conference, Dundee, UK,
September 1996",
title = "The Mathematics of surfaces {VII}: Proceedings of the
Mathematics of Surfaces {VII} Conference, Dundee, {UK},
September 1996",
publisher = "Information Geometers",
address = "Winchester, UK",
pages = "xvii + 507",
year = "1997",
ISBN = "1-874728-12-7",
}
@Proceedings{Daehlen:1998:MMC,
editor = "Morten D{\ae}hlen and Tom Lyche and Larry L.
Schumaker",
booktitle = "Mathematical Methods for Curves and Surfaces {II}:
{Lillehammer}, 1997",
title = "Mathematical Methods for Curves and Surfaces {II}:
{Lillehammer}, 1997",
publisher = "Vanderbilt University Press",
address = "Nashville, TN, USA",
pages = "556",
year = "1998",
ISBN = "0-8265-1315-8",
LCCN = "QA565 .M372 1998",
}
@proceedings{MINGLE:2003}
booktitle = {Advances in Multiresolution for Geometric Modelling},
editor = { N. A. Dodgson, M. S. Floater, M. A. Sabin}
publisher = "Springer-Verlag",
year = "2005",
ISBN = "3-540-21462-3"
}
@proceedings{Sig98:course:1998,
editor = {P. Schr{\"o}der},
title = "Some properties of subdivision derived from splines",
booktitle = "Subdivision for modeling and animation",
series = "Course notes of 25th International conference on Computer Graphics and Interactive Techniques",
month = "July",
year = 1998,
number = 36,
publisher = "ACM Siggraph",
}
@proceedings{DBLP:conf/isvc/2008-1,
editor = {G.~Bebis et al.},
title = {Advances in Visual Computing, 4th International
Symposium, ISVC 2008, Las Vegas, NV, USA, December 1-3, 2008.
Proceedings, Part I},
booktitle = {ISVC (1)},
publisher = {Springer},
series = {Lecture Notes in Computer Science},
volume = {5358},
year = {2008},
isbn = {978-3-540-89638-8},
bibsource = {DBLP, http://dblp.uni-trier.de}
}
%1) Curve and Surface Design: Saint-Malo 2002
%Tom Lyche, Marie-Laurence Mazure, and Larry L. Schumaker (eds.)
% ISBN 0-9728482-0-7
%
% 2) Curve and Surface Fitting: Saint-Malo 2002
% Albert Cohen, Jean-Louis Merrien, and Larry L. Schumaker (eds.)
% ISBN 0-9728482-1-5
% -->
Advances in Visual Computing
4th International Symposium, ISVC 2008, Las Vegas, NV, USA, December 1-3,
2008, Proceedings, Part I
Series: Lecture Notes in Computer Science
Subseries: Image Processing, Computer Vision, Pattern Recognition, and
Graphics , Vol. 5358
Bebis, G.; Boyle, R.; Parvin, B.; Koracin, D.; Remagnino, P.; Porikli,
F.; Peters, J.; Klosowski, J.; Arns, L.; Chun, Y.K.; Rhyne, T.-M.;
Monroe, L. (Eds.)
2008, XLIV, 1173 p., Softcover
ISBN: 978-3-540-89638-8
Advances in Visual Computing
4th International Symposium, ISVC 2008, Las Vegas, NV, USA, December
1-3, 2008. Proceedings, Part I
Book Series Lecture Notes in Computer Science
Publisher Springer Berlin / Heidelberg
ISSN 0302-9743 (Print) 1611-3349 (Online)
Volume Volume 5358/2008
DOI 10.1007/978-3-540-89639-5
Copyright 2008
ISBN 978-3-540-89638-8
Subject Collection Computer Science
SpringerLink Date Tuesday, December 02, 2008
# @article{minpce:, mytag="2013sgp",}
# @article{siam:, mytag="2013siam",}
# @article{pinch:, mytag="12pinch_yy",}
# @article{entropy:, mytag="12entropy",}
Advances in Visual Computing
4th International Symposium, ISVC 2008, Las Vegas, NV, USA, December 1-3,
2008. Proceedings, Part II
Book Series Lecture Notes in Computer Science
Publisher Springer Berlin / Heidelberg
ISSN 0302-9743 (Print) 1611-3349 (Online)
Volume Volume 5359/2008
DOI 10.1007/978-3-540-89646-3
Copyright 2008
ISBN 978-3-540-89645-6
Subject Collection Computer Science
SpringerLink Date Wednesday, December 03, 2008